SPCF cold rolled steel

SPCF is a kind of cold rolled steel under the Japanese standard, it mainly used in the manufacture of cold rolled sheet it is a kind of low carbon steel grades, the steel demand has a good cold bending and welding performance, as well as certain stamping performance. Due to not be heated in the manufacture process, so there is no hot often appeared pitting and tin oxide and other defects, good surface quality, high degree of finish. And the size of the cold rolled products of high precision, the product performance and organization can satisfy some special use requirement,and it also has widely used, such as automobile manufacturing, electrical products, rolling stock, etc.

 

For the SPCF cold rolling steel and strip specification lists, the thickness of 0.3-3.5 mm and width from 120-1850 mm are all available by our company. For the length, we can also offer as your requirements. 

 

The more information of SPCF steel shown in the following table

 

SPCF chemical composition:

GRADE	C% max	Mn% max	P% max	S% max
SPCF	0.08	0.45	0.030	0.030

 

SPCF mechanical properties:

STEEL GRADE	Tensile Strength  N/mm (min)	Yield Strength   N/mm (Max)	Elongation min.
thickness	>0.25	>  0.25	0.25-0.30	0.3-0.4	0.4-0.6	0.6-1.0	1.0-1.6	1.6-2.5	>2.5
SPCF	270	210	-	-	40	42	43	44	45

 

Our company can supply you different sizes of SPCF steel sizes of steel sheet and steel strip. No matter which one you need, don’t hesitate to contact us. We will try our best to satisfy you.